The largest size model of the new ST-X range – the ST-X8 is rated at 8kW output, and approx 81% efficiency.

Already EcoDesign compliant to meet 2022 ErP requirements. Minimal emmisions.

The ST-X8 has a large firebox allowing a greater range of heat output and for larger logs to be burned.

Constructed from a precision-welded thick steel body with cast iron door and thermo-refractory fire brick inner linings.

Many times cleaner than the required standard for “DEFRA” exemption, it can legally be used anywhere in the UK including the strictest of smoke control zones.

Designed with simple, easy to operate user friendly controls.

Designed with a large viewing window for amazing views of the fire. The flame pattern with the advanced “after-burner” system is quite unique.

The ST-X8 is a multi-fuel stove able to efficiently burn wood logs or smokeless coal – the coal ashes will fall through the grate and into the ash can which easily lifts out when full.

The stove is ready to install, no assembly is required and comes complete with high temperature mitt/glove.

Finished in black high temperature paint which we source from the USA and with thermo-ceramic clear glass from the industry-leading “Schott” brand in Germany.

There is an air-wash system to help keep the glass clearer.

The ST-X8 has a 5″(125mm) diameter top and rear flue outlet. Can be used with 5″ diameter flue liner or twinwall flue.

Stove Dimensions (mm):

Height: 853mm

Width: 515mm

Depth: 416mm

The post SALTFIRE ST-X8 TALL appeared first on Kent Stoves.

Originally designed as a compact 3kW its so efficient it will achieve up to 4.7kW if required. Its viewing window is big for a compact stove! ‘Peanut 3’ – can fit a very small UK chimney opening of less than 16” wide. – This can make tight installations so much simpler and easier – rarely would any building/ alteration work need to be done even with a small chimney opening.

Measurements (mm):

Height: 675mm

Width: 348mm

Depth: 312mm

The post SALTFIRE PEANUT 3 TALL appeared first on Kent Stoves.

Designed with simple, easy to operate user friendly controls. Constructed using a triple-layer convection system, there is a precision engineered welded outer and inner steel body with thermo-refractory fire brick inner linings.

Designed with a large viewing window for amazing views of the fire. The flame pattern with the advanced “after-burner” system is quite unique.

The ST4 is a multi-fuel stove able to burn wood logs and smokeless coal – the coal ashes will fall through the grate and into the ash can which easily lifts out when full – if you want a dedicated wood-burner please see the ST1 or ST3 models which share the same advanced technology but with a wood-burning base inside the firebox.

Finished in black high temperature paint which we source from the USA and with thermo-ceramic clear glass from the industry-leading “Schott” brand in Germany.

There is an air-wash system to help keep the glass clearer.

The ST4 has a 5″(125mm) diameter top flue outlet (there is no rear flue exit). Can be used with 5″ diameter flue liner or twinwall flue.

The ST4 has a removable baffle plate to allow cleaning access to the flue.

Stove Dimensions (mm):

H542, W495, D360

The post SALTFIRE ST4 appeared first on Kent Stoves.

The compact Peanut-5 Tall – Rated at 5kW it can heat a decent sized room easily, with easy variable output between 1.5 and 5kW. It’s viewing window is huge for a compact stove! ‘Peanut-5’ – can fit a ‘standard small’ UK chimney opening of 16” wide. – This can make some installations so much simpler and easier – rarely would any building/ alteration work need to be done even with a small chimney opening.

Dimension (mm):

H775

W391

D297

The post SALTFIRE PEANUT 5 TALL appeared first on Kent Stoves.

A larger capacity version with the same huge viewing window as the Bignut. For those rooms which require something a bit larger or for larger fireplace openings. The Peanut-8 has variable output range from 3kW up to a maximum of 9kW with easy to operate fingertip controls. A huge viewing window for superb views of the fire. Full cast-iron inner lining plates (fire bricks), for maximum heat retention and are extremely robust.

7.9kW nominal (official) output – 3 to 9kW controllable output

Dimensions (mm):

H790, W485, D339

The post SALTFIRE PEANUT 8 TALL appeared first on Kent Stoves.

The largest size model of the new ST-X range – the ST-X8 is rated at 8kW output, and approx 81% efficiency.

Already EcoDesign compliant to meet 2022 ErP requirements. Minimal emmisions.

The ST-X8 has a large firebox allowing a greater range of heat output and for larger logs to be burned.

Constructed from a precision-welded thick steel body with cast iron door and thermo-refractory fire brick inner linings.

Many times cleaner than the required standard for “DEFRA” exemption, it can legally be used anywhere in the UK including the strictest of smoke control zones.

Designed with simple, easy to operate user friendly controls.

Designed with a large viewing window for amazing views of the fire. The flame pattern with the advanced “after-burner” system is quite unique.

The ST-X8 is a multi-fuel stove able to efficiently burn wood logs or smokeless coal – the coal ashes will fall through the grate and into the ash can which easily lifts out when full.

The stove is ready to install, no assembly is required and comes complete with high temperature mitt/glove.

Finished in black high temperature paint which we source from the USA and with thermo-ceramic clear glass from the industry-leading “Schott” brand in Germany.

There is an air-wash system to help keep the glass clearer.

The ST-X8 has a 5″(125mm) diameter top and rear flue outlet. Can be used with 5″ diameter flue liner or twinwall flue.

Stove Dimensions (mm):

H664, W515, D416

The post SALTFIRE ST-X8 appeared first on Kent Stoves.

The mid size model of the new ST-X range – the ST-X Wide is rated at 5kW output, and approx 79% efficiency.

The ST-X Wide has a particularly wide firebox for a 5kW model allowing a greater range of heat output and for larger logs to be burned.

Already EcoDesign compliant to meet 2022 ErP requirements. Minimal emmisions.

Constructed from a precision-welded thick steel body with cast iron door and thermo-refractory fire brick inner linings.

Many times cleaner than the required standard for “DEFRA” exemption, it can legally be used anywhere in the UK including the strictest of smoke control zones.

Designed with a large viewing window for amazing views of the fire. The flame pattern with the advanced “after-burner” system is quite unique.

The ST-X Wide has an optional multi-fuel kit making it able to efficiently burn wood logs or smokeless coal – the coal ashes will fall through the grate and into the ash can which easily lifts out when full.

Finished in black high temperature paint which we source from the USA and with thermo-ceramic clear glass from the industry-leading “Schott” brand in Germany.

Dimensions (mm):

H600, W592, D285

The post SALTFIRE ST-X WIDE TALL appeared first on Kent Stoves.

Easy to operate controls and large ceramic glass viewing window for great views of the fire.

The C5 is a multi-fuel cassette stove able to efficiently burn wood logs or smokeless coal – the ashes will fall through the grate and into the ash pan which easily lifts out for emptying.

The post SALTFIRE INSET C5 appeared first on Kent Stoves.

inner linings. Many times cleaner than the required standard for “DEFRA” exemption, it can legally be used anywhere in the UK including the strictest of smoke control zones. Designed with simple, easy to operate user friendly controls, has a viewing window for amazing views of the fire.

The Saltfire Classic is a multi-fuel stove able to efficiently burn wood logs or smokeless coal – the ashes will fall through the grate and into the ash pan which easily lifts out for emptying.

The post SALTFIRE CLASSIC appeared first on Kent Stoves.

Easy to operate controls and large ceramic glass viewing window for great views of the fire.

The C7 is a multi-fuel cassette stove able to efficiently burn wood logs or smokeless coal – the ashes will fall through the grate and into the ash pan which easily lifts out for emptying.

The post SALTFIRE INSET C7 appeared first on Kent Stoves.